8 Fully programmable Multi-Zone Expandable to 24 Zones for the
must professional installations, the Premier series provides unsurpassed
flexibility in all areas of system design and performance.
The Premier 24 is suited to most domestic and light commercial
applications. Eight fully programmable zones with three dedicated
for Personal Attack Tamper and Push to Set allows the system to
be designed to meet your requirements.
- 8 Fully programmable zones with 3 dedicated to PA, Tamper and
Push To Set.
- 4 level settings allow the system to be part set in various
combinations.
- Up to 4 attractive LCD 32 character keypads can be fitted with
the system allowing the main panel to be concealed in a cupboard
or loft area.
- A 500 event memory log stores information not only about alarm
activations but also which user sets and unsets the system.
- The Premier 24 can be connected to communication equipment which
can be linked to an Alarm Receiving Centre or SMS text messaging
optional com module.The eight fully programmable zones with four
level settings allow the system to be tailored to meet your specific
needs.
This gives you the flexibility to protect various combinations
of rooms/areas whilst leaving others free to enable movement around
the property e.g. a part set program protecting all downstairs areas
whilst leaving the upstairs free during the night.
Surface-mount Keypad incorporating Proximity reader can be placed
around your property in an area of convenience so that you can operate
your alarm system whilst the main panel can be hidden away, limiting
the threat of sabotage by an intruder. The LCD keypad (large display)
featuring touchtone keys, backlit 32 character display which will
allow you to enter user names and zone descriptions into the panel
rather than numbers and duress buttons for Panic, Fire and Medical.
You can have up to 3 additional Remote Keypads to the system.
The remote proximity keypads with the Proximity Keytag facility,
allowing for to to arm and disarm the control panel by a simple
case of putting the proximity keytag briefly on the remote keypad.
The 500 event time & date stamped log memory stores information
such as the zone area in which an intrusion takes place. This memory
log conforms to the guideline set out by the Association of British
Insurers (ABI).
Timed entry exit entrance route (Front door to hall). Surface magnetic
contact, complete with tamper to comply with BS4737: Part 3: Section
3.3.
Prestige Compact IR Professional wide angle / long range Projected
Passive infra-red Detector 4 plan 34 zone sealed optics and adjustable
mounting height covering area of 15 metres surface or corner mounted
optimum height 1.8m to 2.5m. Automatic temperature compensation
and Thermal drift, Analogue tripe pulse count, LED walk test and
High RFI immunity for internal trap protection. The Passive Infrared
Receiver works by constantly monitoring the Infrared energy levels
around a room and recognising a change caused by the entry of an
intruder.
Approved to BS EN 55022 Class B and BS EN 50130-4 : 1996.
Internal sounder for extra audibility within main control panel.
An internal sounder for burglar alarm panels, also to allow keypad
and entry exit sounds to be heard if it is difficult to hear the
alarm control panel's audio when the keypad is pressed or the entry
exit sequence is triggered.
Odyssey 3E Sounder and Strobe Unit Grade 3 Foam resistant external
Polycarbonate 3mm bell box in white, high power 109db electronic
sounder with the new digital fail-safe self cut-off timer module
to limit sounder to 20 minutes self activating self powered sounder
with blue visual xenon strobes light and twin flashing alternating
LED’s, Lid & Wall Tamper to be mounted at the front elevation
of building British Standard 4737. EN 50131 Grade 3.
All alarm circuit wiring, sensors, magnetic switches and sounders
will be 24hr anti-tamper proof while system is set or un-set, if
tampered with, this will activate alarm system.
Un-switch 13amp fused spur unit to supply the alarm end station
control panel. To be fitted by our qualified electrician to IEE
regulations.
All alarm circuit cables will be hidden wherever possible. The
above installation will be carried out to British Standard 4737
and will carry a one year guarantee from date of installation.
|