The PowerMax Wireless Burglar Alarm can have up to 28 Wireless
Zones and 2 Hardwires Zones and all hardwire devices can be power
by the PowerMax on Board Power. The PowerMax Alarm has a wide range
of devices to choose from including Smoke and Flood detectors as
well as the standard PIR’s and Door Contacts.
PowerMax plus range is a powerful home management and security system
for small commercial and residential applications with
Communicator (PSTN fitted as standard) for the benefit of Self-Monitoring
Not only does it provides immediate notifications of intrusion,
smoke, flood, gas leak or excess carbon monoxide. It also enables
homeowners to view control their homes and their automated systems
via internet, both inside and out, anytime, from anywhere. Depending
on the peripherals they select, PowerMax+ can pre-program lights,
shades, gates and heating/cooling systems or control them by event
System event reports can be sent automatically to any private phone
or, through the internet, to any computer. PowerMax+'s clear visual
and voice guidance system minimizes training and support visits
This gives you the flexibility to protect various combinations of
rooms/areas whilst leaving others free to enable movement around
the property e.g. a part set program protecting all downstairs areas
whilst leaving the upstairs free during the night.
The MCT-234 is a 4-button miniature wireless CodeSecure keyfob
transmitter designed for arming and disarming of wireless security
systems, and for emergency signaling, access control, home automation
and remote control applications.
When activated, each button initiates a CodeSecure transmission
of a unique 28-bit (rolling code) ID command, selected from over
100 million possible combinations. To prevent "code grabbing"
by potential intruders trying to defeat the security system, the
next time the button is activated, the transmitter sends out a different
CodeSecure ID, which is selected by a proprietary code encryption
algorithm and which can be recognized only by the target receiver.
The event time & date stamped log memory stores information
such as the zone area in which an intrusion takes place. This memory
log conforms to the guideline set out by the Association of British
Timed entry exit entrance route (Front door to hall). With a MCT-302
fully supervised PowerCode magnetic contact transmitter, designed
primarily for protecting doors and windows using a built-in magnetic
contact that operates in conjunction with a magnet to detect the
opening and closure of a door or window. This highly reliable top-performance
wireless device is easy to install and operate in a wide range of
residential and commercial environments. to comply with BS4737:
Part 3: Section 3.3.
Next+ K9-85 MCW is a PowerCode wireless digital PIR detector designed
to enable homeowners to secure their homes while allowing their
pets to move freely anywhere in the house. Employing Visonic's patented
"Target Specific Imaging" optical system (TSI) and unique
pet identification software algorithm, the Next+ K9-85 has an unprecedented
capacity to reliably distinguish between human bodies and pets weighing
up to 38 kg (85lb).
Next+ K9-85 MCW is a fully supervised wireless detector with anti-collision
PowerCode technology. It is compatible with PowerMax and all Visonic
PowerCode wireless panels and receivers. Next+ K9-85 MCW implements
a whole new generation of patented technologies including FM Digital
Signal Processing (FM-DSP), "True Motion Recognition"
with Fuzzy Logic algorithm (TMR), and state-of-the-art 3D cylindrical
The result is the industry's best detection accuracy, false alarm
immunity and ultimate long term reliability - in an attractive,
easily installed wireless detector designed for any pet-loving home
Internal sounder for extra audibility within main control panel.
An internal sounder for burglar alarm panels, also to allow keypad
and entry exit sounds to be heard if it is difficult to hear the
alarm control panel's audio when the keypad is pressed or the entry
exit sequence is triggered.
MCS-710 is a self-powered, fully-wireless outdoor (IP55) Mater Bell
Box with siren and strobe. It requires no external power source
and without any cabling, enabling installation even where wiring
is difficult or impossible.
This fully-supervised siren features anti-collision PowerCode™
technology and provides visual notifications of intrusions, fire
alarms, low battery voltage or communication disruptions and auditory
squawk notifications of arming and disarming. This enables home
owners to arm and disarm the system from outside the house using
a keyfob and receive audible and visual verification of system status.
This valuable capability prevents false alarms due to breach of
entry/exit delay settings.
All alarm circuit wiring, sensors, magnetic switches and sounders
will be 24hr anti-tamper proof while system is set or un-set, if
tampered with, this will activate alarm system.
Un-switch 13amp fused spur unit to supply the alarm end station
control panel. To be fitted by our qualified electrician to IEE
All alarm circuit cables will be hidden wherever possible. The
above installation will be carried out to British Standard 4737
and will carry a one year guarantee from date of installation.